Jump to content

0-6-0 CHASSIS QUALITY


Recommended Posts

I have just purchased the two locos that came with the mixed freight set from around 2015? Both have issues with corners, and upon stripping I found the chassis has started expanding and cracking. Basically the chassis are disintergrating. I am wondering if this is a known fault with later Chinese chassis? I have a couple of uk made from the 80's and these are still as solid as the day they were made.

Link to comment
Share on other sites

  • 1 month later...

A well known problem with some of the earlier Chinese made locos. As 96RAF says, mazak rot is incurable. The only solution is a replacement chassis. Older British made chassis very rarely have this problem because better quality control was exercised over the alloy mix.

Link to comment
Share on other sites

2015 seems late for Mazak rot, which is worrying. I have just bought a second hand chassis off Peters Spares for £2.50 (I was building an 0-6-0 out of bits) so replacement at least is not expensive. The only issue is that Peters Spares only has the sprung 3rd axle type.

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
  • Create New...