AG9166 Sanding Pad Twin Pack (600/1000 Grit)

A twin pack of dual-grit sanding pads, one wide and one thin, each double-sided with 600 grit and 1000 grit. The 600 grit levels rough and built-up surfaces; the 1000 grit refines them to a paint-ready finish. Both pads flex, so they follow curved parts as readily as flat ones. Humbrol has been supplying modellers' workbenches for decades.

Key Features

• 2 flexi-sanding pads — wide and thin
• Dual-grit 600/1000 on both faces of each pad
• Thin pad reaches narrow recesses and tight panel lines
• Deburrs and de-sprues plastic kit parts
• Washable with water and reusable once fully dry

Ideal For

• Most plastics, resin, wood, metal, glass and ceramics
• Cardboard, sealed plaster and sealed hardboard
• Pre-paint preparation on rounded fuselages and hull panels

How to Use

Start with the 600 grit side to take down sprue marks and rough areas, then finish with 1000 grit for a paint-ready surface. Use the thin pad for recesses the wide pad cannot reach. When you paint afterwards, two thin coats are preferable to one thick coat.

Warning: not suitable for children under 14 years.