Skip to main content

R30323 RailRoad Plus DB, Class 67, Bo-Bo, 67005 'Queen's Messenger' - Era 10

Locomotives 10 Network Franchising 2006-2017

£96.99

In Stock
Item code:
R30323

Earn up to 970 Hobby Points
with this purchase

Hornby Brand
1:76 Scale 00 Gauge Item Scale
DCC Ready 8 pin socket DCC Status

Product Info

Class 67 locomotives are a class of Bo-Bo diesel-electric locomotives which were built for the English Welsh & Scottish Railway (EWS) between 1999 and 2000 by Alstom at Meinfesa in Valencia, Spain with drive components from General Motors' Electro-Motive Division, builders of the Class 66. The bodyshell is a monocoque load bearing Alstom design, the bogies are an "H" frame Alstom design, the engine, traction motors and control electronics are GM-EMD products.


Unlike the Class 66, the traction motors are frame mounted rather than axle hung to reduce unsprung mass and the gear ratio is increased allowing higher speeds which reflect the locomotives mixed traffic brief. The cab design has a central driving position. Initially the class were used primarily on mail trains. In June 2003 EWS lost the Royal Mail mail train contract, with services diminishing to complete cessation in March 2004. The locomotives have since been used by First ScotRail on the Caledonian Sleeper on non-electrified lines north of Edinburgh. In April 2015, GB Railfreight commenced a contract to haul the Caledonian Sleeper with 67004 repainted and renamed for use on the service.


When GB Railfreight started to provide the trains and crews for the Serco franchise in 2015, it was planned to use rebuilt Class 73/9s. The first of these came into service in February 2016. The Class 67s continued to be used on some services for another couple of years. Class 67s are also used as Thunderbird rescue locomotives for failed trains on the East Coast Main Line, on some freight trains and for use on chartered tourist trains. Two locomotives were assigned to, and received special liveries for, use with the Royal Train from 2003, and a third had a commemorative jubilee livery applied for use with the Royal Train during the Diamond Jubilee of Elizabeth II in 2012.


67005 is one locomotive assigned to the royal train, a service it has been responsible for since 2004. Initially in EWS maroon, the locomotive would later be named 'Queen's Messenger' 67005 is painted in the royal claret livery and operated by DB Schenker tasked with hauling members of the royal family around the UK.


This Railroad model fitted with a 3 pole motor and simple gearing, proving to be a reliable runner on any layout. The 8 pin DCC socket allows the model to be used on a digital layout where required and its railroad specification makes it ideal as a starter model.

Welcome to the HM7000 Control System

HM7000 is an innovative way of controlling and operating model railways. Combining Bluetooth® technology and app-based control, the HM7000 Control System has been designed to revolutionise the controlling of a model railway.

Learn more
video thumbnail
  • Bluetooth® Connectivity
  • Free Sounds
  • Quick CV Editing
  • Multiple Control Options
  • 40+ Profile Settings
  • Other Options

HM7000 Products

HM7000-8TXS: Bluetooth® & DCC Sound Decoder (8-pin)
HM7000-8TXS: Bluetooth® & DCC Sound Decoder (8-pin)
Out of stock
HM7000-8TXS: Bluetooth® & DCC Sound Decoder (8-pin) R7336 |
  • star - filled
  • star - filled
  • star - filled
  • star - filled
  • star - empty
(6) reviews
Hornby
HM7070 - Power Bank
HM7070 - Power Bank
Available to pre-order
HM7070 - Power Bank R7377 |
Hornby
HM7040: Bluetooth® Legacy Dongle
HM7040: Bluetooth® Legacy Dongle
HM7040: Bluetooth® Legacy Dongle R7326 |
  • star - filled
  • star - filled
  • star - filled
  • star - filled
  • star - filled
(1) reviews
Hornby

The following points must be considered below when purchasing. HM | DCC and the HM7000 decoders have been extensively tested up to a range of 45 metres in plastic bodied locomotives and up to 12 metres in die-cast bodied locomotives. HM | DCC and the HM7000 decoders have been extensively tested up to a max of 14 non-stationary, running locomotives. HM | DCC and the HM7000 decoders have been extensively tested on iOS devices dating as far back as 5 years from today's date. Any devices older than this cannot be commented on for proper function by Hornby Hobbies. Please ensure that the incompatibility list is considered prior to any purchase.

What's Inside

1x Railroad Locomotive

Recommended For You

RailRoad LNER, Brake Composite Coach - Era 3
RailRoad LNER, Brake Composite Coach - Era 3 R4333 | 1:76 Scale 00 Gauge
  • star - filled
  • star - filled
  • star - filled
  • star - filled
  • star - filled
(2) reviews
Hornby
RailRoad LNER, Composite Coach - Era 3
RailRoad LNER, Composite Coach - Era 3 R4332 | 1:76 Scale 00 Gauge
  • star - filled
  • star - filled
  • star - filled
  • star - filled
  • star - 20% filled
(4) reviews
Hornby
RailRoad Pullman, Parlour Car - Era 3
RailRoad Pullman, Parlour Car - Era 3 R4312 | 1:76 Scale 00 Gauge
  • star - filled
  • star - filled
  • star - filled
  • star - filled
  • star - 20% filled
(9) reviews
Hornby
RailRoad BR, 20T Brake Van - Era 4/5
RailRoad BR, 20T Brake Van - Era 4/5 R6368 | 1:76 Scale 00 Gauge
  • star - filled
  • star - filled
  • star - filled
  • star - filled
  • star - 20% filled
(6) reviews
Hornby

Tech Specs

Item Length - Without Packaging (cm)
23
Item Height - Without Packaging (cm)
5
Item Width - Without Packaging (cm)
3.5
Item Weight - Without Packaging
0.23
Item Scale
1:76 Scale 00 Gauge
Finish
Painted
Colour
Claret
Gauge
OO
DCC Status
DCC Ready 8 pin socket
Operator
DB Schenker
Designer
Electromotive Diesel
Wheel Configuration
Bo-Bo
Livery
DB Royal Claret
Minimum Curve (mm)
Radius 2
Motor
3 Pole
Number of Parts
1
Class
Class 67
Buffer Type
Separate Plastic Buffers
Coupling Type
Fixed Tension Lock
Hornby Decoder Compatibility Primary
HM7000-8TXS: Bluetooth® & DCC Sound Decoder (8-pin)
product_hby_dcc_status DCC Ready 8 pin socket

WARNING! Not suitable for children under 36 months it contains small parts which can present a choking hazard and some components have functional sharp points and edges. Handle with care. Before giving the Toy to a child remove all packaging and any other component which is not part of the toy. Colour and contents may differ from those illustrated. Please retain these details and the address for future reference.

Reviews